Well I got a surprise email from my main-PI yesterday reminding me that I was teaching two classes this week. I knew it was coming, the surprise was that the summer courses are still going on, I haven’t gotten a single email about them since I taught my intro to MATLAB class. Normally when I teach I put all the information out there on the web for all of you to use it how you see fit. This class isn’t going to be that way, but there’s a good reason for it.(more…)
All good things come to an end. It’s week ten and officially our last post in this quick run through. As always we use FREE SOFTWARE to do this, so if you’re just joining in you can find the full course in the Solid Modeling for Beginners category and you don’t need to spend money to learn. Since this is our last post I wanted to do something a little different today, let’s get started!
It’s week nine! Welcome, to my little solid modeling course. As usual, we’re using FREE SOFTWARE to do this, I feel that everyone should be able to learn if they want and this was the easiest way to do that. If you’re just finding my little series, you can find the full course in the Solid Modeling for Beginners category. For everyone else, we’re finishing our lamp today (for real this time!) and next week is the last week in the course! Let’s do this!
Welcome back or maybe welcome aboard! This is week eight of my online solid modeling course. As always we use FREE SOFTWARE for this class so no matter who you are, if you have internet access you can do this (seriously, it’s all cloud based so you don’t even need a fast computer!). If you’re just finding my little corner of the internet, never fear you can find all the courses in the super useful Solid Modeling for Beginners category. They get listed in reverse order, so work your way up from the bottom. Now that we’ve finished the intro let’s dive in!
If you’re following along you’ve made it to week seven! This course is taught using FREE SOFTWARE so if you ever wanted to learn how to solid model, this course is the one for you. If you’re just joining then you can find all of our classes listed here in our Solid Modeling for Beginners category. They are in reverse order, so start at the bottom. Today we are setting aside our lightbulb for a moment to create something to put it in. I’ve given up keeping what we’re doing a secret (since I always put the final product in the header image anyway). So with that let’s get to it!
Welcome to week six! As always, this is a free class using FREE SOFTWARE. If you want to learn how to solid model, but couldn’t afford fancy or expensive software, then this course is for you. We’ll be taking things step by step so you (hopefully) will be able to follow along easily. If this is your first visit to my lovely series, then I would suggest you start at week one, which you can find in our incredibly helpful category Solid Modeling for Beginners. Today we’re going to finish our project from last week and make a super neat light bulb!
Wow, week five already! As per my usual intro, this is a free class using FREE software so if you ever wanted to create a 3D model, this is for you and all you need is internet access to use the program we will be using. Now if you are just joining you’re going to want to start at week one, which you can find all the posts in the super lovely Solid Modeling for Beginners category. We finally did it, last week we made something cool looking! Today we’re going to expand on that and use what we learned to create another awesome thing!
Welcome to week four! For those of us just tuning in, this is a class for solid modeling using FREE software, so if you have internet access, you can do this too! You can find the whole course in the handy Solid Modeling for Beginners category. Last week we introduced a whole lot of navigation tools and helped you get situated into the world that you’ll be able to model in. So let’s get started by doing a quick recap of the past weeks and hopefully you’ve done your homework because we’re using that part today to make something more impressive than a cube.
This course will all be taught using free software so have no fear, you can do it too! For those just joining us you can find all the posts in this series in the handy Solid modeling for beginners category. For the past two weeks I’ve been going over best practices. The reason is the tools are straightforward to learn, but how we use them is what separates someone who is learning from someone who is a pro. I have had some thoughts about what I wanted to cover this week for that reason, but this week we’re making something and by me we, I mean you! First, let’s do a quick recap of what we’ve learned and we can get started.
We’re back again with week 2 of solid modeling for beginners! For those of you just joining in, you can read the introduction (pre-week 1) in this post. You can also find all the posts in this series (including week 1) in the Solid modeling for beginners category. Solid modeling isn’t too difficult, but it does take time and it does mean you need to learn to think about objects in different ways. Week 1 did a great job of introducing this type of thought process and today we’re going to continue from where that left off. Let’s just dive right in!
Welcome to solid modeling for beginners! Each week I’ll post some new and exciting things so you can try your hand at solid modeling. It’s easier than it looks to get started and once you do, you’ll be able to create amazing things that you can 3D print, plans to build something really cool, or maybe you just want to create some art! You can do anything you want with solid modeling, that’s the beauty of it! Let’s get started.
Today marks the start of my summer class. It’s a small group and while it doesn’t directly have anything to do with brain-machine interfaces (frankly none of my research in the lab does) in the age of commercialized 3D printing knowing how to solid model is an important skill that can be applied to basically anything, yes even brain-machine interfaces! Best of all, you can learn with us for free (software included)!